Constructing a Sequence Detecting Robustly Testable Path Delay Faults in Sequential Circuits

Automation and Remote Control - We propose a method for constructing a sequence of Boolean vectors of input variables that delivers test pairs $$(v_1,v_2) $$ of neighboring vectors in the space of...     

Correlative Light and Electron Microscopy Using Frozen Section Obtained Using Cryo-Ultramicrotomy

Immuno-electron microscopy (Immuno-EM) is a powerful tool for identifying molecular targets with ultrastructural details in biological specimens. However, technical barriers, such as the loss of ultrastructural integrity, the decrease in antigenicity, or artifacts in the handling process, hinder the widespread use of the technique by biomedical researchers. We developed a method to overcome such challenges by combining light and electron microscopy with immunolabeling based on Tokuyasu’s method. Using cryo-sectioned biological specimens, target proteins with excellent antigenicity were first immunolabeled for confocal analysis, and then the same tissue sections were further processed for electron microscopy, which provided a well-preserved ultrastructure comparable to that obtained using conventional electron microscopy. Moreover, this method does not require specifically designed correlative light and electron microscopy (CLEM) devices but rather employs conventional confocal and electron microscopes; therefore, it can be easily applied in many biomedical studies.     

AP2M1 Supports TGF-β Signals to Promote Collagen Expression by Inhibiting Caveolin Expression

The extracellular matrix (ECM) is important for normal development and disease states, including inflammation and fibrosis. To understand the complex regulation of ECM, we performed a suppressor screening using Caenorhabditis elegans expressing the mutant ROL-6 collagen protein. One cuticle mutant has a mutation in dpy-23 that encodes the μ2 adaptin (AP2M1) of clathrin-associated protein complex II (AP-2). The subsequent suppressor screening for dpy-23 revealed the lon-2 mutation. LON-2 functions to regulate body size through negative regulation of the tumor growth factor-beta (TGF-β) signaling pathway responsible for ECM production. RNA-seq analysis showed a dominant change in the expression of collagen genes and cuticle components. We noted an increase in the cav-1 gene encoding caveolin-1, which functions in clathrin-independent endocytosis. By knockdown of cav-1, the reduced TGF-β signal was significantly restored in the dpy-23 mutant. In conclusion, the dpy-23 mutation upregulated cav-1 expression in the hypodermis, and increased CAV-1 resulted in a decrease of TβRI. Finally, the reduction of collagen expression including rol-6 by the reduced TGF-β signal influenced the cuticle formation of the dpy-23 mutant. These findings could help us to understand the complex process of ECM regulation in organism development and disease conditions.     

Approaching Ultrastable High‐Rate Li–S Batteries through Hierarchically Porous Titanium Nitride Synthesized by Multiscale Phase Separation

Porous architectures are important in determining the performance of lithium–sulfur batteries (LSBs). Among them, multiscale porous architecutures are highly desired to tackle the limitations of single‐sized porous architectures, and to combine the advantages of different pore scales. Although a few carbonaceous materials with multiscale porosity are employed in LSBs, their nonpolar surface properties cause the severe dissolution of lithium polysulfides (LiPSs). In this context, multiscale porous structure design of noncarbonaceous materials is highly required, but has not been exploited in LSBs yet because of the absence of a facile method to control the multiscale porous inorganic materials. Here, a hierarchically porous titanium nitride (h‐TiN) is reported as a multifunctional sulfur host, integrating the advantages of multiscale porous architectures with intrinsic surface properties of TiN to achieve high‐rate and long‐life LSBs. The macropores accommodate the high amount of sulfur, facilitate the electrolyte penetration and transportation of Li⁺ ions, while the mesopores effectively prevent the LiPS dissolution. TiN strongly adsorbs LiPS, mitigates the shuttle effect, and promotes the redox kinetics. Therefore, h‐TiN/S shows a reversible capacity of 557 mA h g^?1 even after 1000 cycles at 5 C rate with only 0.016% of capacity decay per cycle.     

An Intelligent Product Recommendation Model to Reflect the Recent Purchasing Patterns of Customers

Mobile Networks and Applications - This study suggests a new product recommendation model to reflect the recent purchasing patterns of customers. There are many methods to measure the similarity...     

Solution‐Processable Photonic Inks of Mie‐Resonant Hollow Carbon–Silica Nanospheres

Hollow carbon–silica nanospheres that exhibit angle‐independent structural color with high saturation and minimal absorption are made. Through scattering calculations, it is shown that the structural color arises from Mie resonances that are tuned precisely by varying the thickness of the shells. Since the color does not depend on the spatial arrangement of the particles, the coloration is angle independent and vibrant in powders and liquid suspensions. These properties make hollow carbon–silica nanospheres ideal for applications, and their potential in making flexible, angle‐independent films and 3D printed films is explored.     

Jig-free laser welding of Eagle XG glasses by using a picosecond pulsed laser

We have performed the jig-free laser welding on the alkaline earth boro-aluminosilicate glass (Eagle XG, Corning), which is commonly used in the display devices, by using a picosecond pulsed laser. Two sheets of Eagle XG glasses with 0.5 mm thickness each were placed one on top of the other. Due to the jig-free laser welding, there was a very thin air gap between the two glasses, and the experiment proceeded by line scanning. The welding performance was evaluated by observing the optical images from the top view and the bottom view and comparing the line images. We could bond the two glass surfaces on the laser spot, and achieve the successful welding of such glasses in the scanning speeds from 10 mm/s to 50 mm/s with the laser irradiance from 50 TW/cm²(500 J/cm²) to 83 TW/cm² (830 J/cm²). We demonstrated the feasibility of jig-free laser welding on the Eagle XG glass with the welding strength up to 50 MPa.

     

Nitrogen passivation formation on Cu surface by Ar–N2 plasma for Cu-to-Cu wafer stacking application

Microsystem Technologies - Wafer stacking technology provides reduced interconnect delay, improved bandwidth, reduced form factor, and decreased cost. Solder-based metallic die bonding is presently...     

Multiphase topology optimization with a single variable using the phase-field design method

In this study, a multimaterial topology optimization method using a single variable is proposed by combining the solid isotropic material with penalization method and the reaction-diffusion equation. Unlike ordinary multimaterial optimization, which requires several variables depending on the number of material types, this method intends to represent various materials as one variable. The proposed method combines two special functions in the sensitivity analysis of the objective function to converge the design variable into prespecified density values defined for each of the multimaterials. The composition constraint based on a normal distribution function is also introduced to estimate the distribution of each target density value in a single variable. It enables density exchange between multiple materials by increasing or decreasing the amount of a specific material. The proposed method is applied to structural and electromagnetic problems to verify its effectiveness, and its usefulness is also confirmed from the viewpoint of cost and computation time.